Reposting after was mistakenly removed by mods (since resolved - Thanks)submitted by xSeq22x to CryptoCurrency [link] [comments]
A frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important.
For better formatting see https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b
CosmosCosmos is a heterogeneous network of many independent parallel blockchains, each powered by classical BFT consensus algorithms like Tendermint. Developers can easily build custom application specific blockchains, called Zones, through the Cosmos SDK framework. These Zones connect to Hubs, which are specifically designed to connect zones together.
The vision of Cosmos is to have thousands of Zones and Hubs that are Interoperable through the Inter-Blockchain Communication Protocol (IBC). Cosmos can also connect to other systems through peg zones, which are specifically designed zones that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Cosmos does not use Sharding with each Zone and Hub being sovereign with their own validator set.
For a more in-depth look at Cosmos and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Cosmos on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
PolkadotPolkadot is a heterogeneous blockchain protocol that connects multiple specialised blockchains into one unified network. It achieves scalability through a sharding infrastructure with multiple blockchains running in parallel, called parachains, that connect to a central chain called the Relay Chain. Developers can easily build custom application specific parachains through the Substrate development framework.
The relay chain validates the state transition of connected parachains, providing shared state across the entire ecosystem. If the Relay Chain must revert for any reason, then all of the parachains would also revert. This is to ensure that the validity of the entire system can persist, and no individual part is corruptible. The shared state makes it so that the trust assumptions when using parachains are only those of the Relay Chain validator set, and no other. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. The hope is to have 100 parachains connect to the relay chain.
For a more in-depth look at Polkadot and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Polkadot on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
AvalancheAvalanche is a platform of platforms, ultimately consisting of thousands of subnets to form a heterogeneous interoperable network of many blockchains, that takes advantage of the revolutionary Avalanche Consensus protocols to provide a secure, globally distributed, interoperable and trustless framework offering unprecedented decentralisation whilst being able to comply with regulatory requirements.
Avalanche allows anyone to create their own tailor-made application specific blockchains, supporting multiple custom virtual machines such as EVM and WASM and written in popular languages like Go (with others coming in the future) rather than lightly used, poorly-understood languages like Solidity. This virtual machine can then be deployed on a custom blockchain network, called a subnet, which consist of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance.
Avalanche was built with serving financial markets in mind. It has native support for easily creating and trading digital smart assets with complex custom rule sets that define how the asset is handled and traded to ensure regulatory compliance can be met. Interoperability is enabled between blockchains within a subnet as well as between subnets. Like Cosmos and Polkadot, Avalanche is also able to connect to other systems through bridges, through custom virtual machines made to interact with another ecosystem such as Ethereum and Bitcoin.
For a more in-depth look at Avalanche and provide more reference to points made in this article, please see here and here
(There's a youtube video with a quick video overview of Avalanche on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
Comparison between Cosmos, Polkadot and AvalancheA frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions. I want to stress that it’s not a case of one platform being the killer of all other platforms, far from it. There won’t be one platform to rule them all, and too often the tribalism has plagued this space. Blockchains are going to completely revolutionise most industries and have a profound effect on the world we know today. It’s still very early in this space with most adoption limited to speculation and trading mainly due to the limitations of Blockchain and current iteration of Ethereum, which all three of these platforms hope to address. For those who just want a quick summary see the image at the bottom of the article. With that said let’s have a look
CosmosEach Zone and Hub in Cosmos is capable of up to around 1000 transactions per second with bandwidth being the bottleneck in consensus. Cosmos aims to have thousands of Zones and Hubs all connected through IBC. There is no limit on the number of Zones / Hubs that can be created
PolkadotParachains in Polkadot are also capable of up to around 1500 transactions per second. A portion of the parachain slots on the Relay Chain will be designated as part of the parathread pool, the performance of a parachain is split between many parathreads offering lower performance and compete amongst themselves in a per-block auction to have their transactions included in the next relay chain block. The number of parachains is limited by the number of validators on the relay chain, they hope to be able to achieve 100 parachains.
AvalancheAvalanche is capable of around 4500 transactions per second per subnet, this is based on modest hardware requirements to ensure maximum decentralisation of just 2 CPU cores and 4 GB of Memory and with a validator size of over 2,000 nodes. Performance is CPU-bound and if higher performance is required then more specialised subnets can be created with higher minimum requirements to be able to achieve 10,000 tps+ in a subnet. Avalanche aims to have thousands of subnets (each with multiple virtual machines / blockchains) all interoperable with each other. There is no limit on the number of Subnets that can be created.
ResultsAll three platforms offer vastly superior performance to the likes of Bitcoin and Ethereum 1.0. Avalanche with its higher transactions per second, no limit on the number of subnets / blockchains that can be created and the consensus can scale to potentially millions of validators all participating in consensus scores ✅✅✅. Polkadot claims to offer more tps than cosmos, but is limited to the number of parachains (around 100) whereas with Cosmos there is no limit on the number of hubs / zones that can be created. Cosmos is limited to a fairly small validator size of around 200 before performance degrades whereas Polkadot hopes to be able to reach 1000 validators in the relay chain (albeit only a small number of validators are assigned to each parachain). Thus Cosmos and Polkadot scores ✅✅
CosmosTendermint consensus is limited to around 200 validators before performance starts to degrade. Whilst there is the Cosmos Hub it is one of many hubs in the network and there is no central hub or limit on the number of zones / hubs that can be created.
PolkadotPolkadot has 1000 validators in the relay chain and these are split up into a small number that validate each parachain (minimum of 14). The relay chain is a central point of failure as all parachains connect to it and the number of parachains is limited depending on the number of validators (they hope to achieve 100 parachains). Due to the limited number of parachain slots available, significant sums of DOT will need to be purchased to win an auction to lease the slot for up to 24 months at a time. Thus likely to lead to only those with enough funds to secure a parachain slot. Parathreads are however an alternative for those that require less and more varied performance for those that can’t secure a parachain slot.
AvalancheAvalanche consensus scan scale to tens of thousands of validators, even potentially millions of validators all participating in consensus through repeated sub-sampling. The more validators, the faster the network becomes as the load is split between them. There are modest hardware requirements so anyone can run a node and there is no limit on the number of subnets / virtual machines that can be created.
ResultsAvalanche offers unparalleled decentralisation using its revolutionary consensus protocols that can scale to millions of validators all participating in consensus at the same time. There is no limit to the number of subnets and virtual machines that can be created, and they can be created by anyone for a small fee, it scores ✅✅✅. Cosmos is limited to 200 validators but no limit on the number of zones / hubs that can be created, which anyone can create and scores ✅✅. Polkadot hopes to accommodate 1000 validators in the relay chain (albeit these are split amongst each of the parachains). The number of parachains is limited and maybe cost prohibitive for many and the relay chain is a ultimately a single point of failure. Whilst definitely not saying it’s centralised and it is more decentralised than many others, just in comparison between the three, it scores ✅
CosmosTendermint consensus used in Cosmos reaches finality within 6 seconds. Cosmos consists of many Zones and Hubs that connect to each other. Communication between 2 zones could pass through many hubs along the way, thus also can contribute to latency times depending on the path taken as explained in part two of the articles on Cosmos. It doesn’t need to wait for an extended period of time with risk of rollbacks.
PolkadotPolkadot provides a Hybrid consensus protocol consisting of Block producing protocol, BABE, and then a finality gadget called GRANDPA that works to agree on a chain, out of many possible forks, by following some simpler fork choice rule. Rather than voting on every block, instead it reaches agreements on chains. As soon as more than 2/3 of validators attest to a chain containing a certain block, all blocks leading up to that one are finalized at once.
If an invalid block is detected after it has been finalised then the relay chain would need to be reverted along with every parachain. This is particularly important when connecting to external blockchains as those don’t share the state of the relay chain and thus can’t be rolled back. The longer the time period, the more secure the network is, as there is more time for additional checks to be performed and reported but at the expense of finality. Finality is reached within 60 seconds between parachains but for external ecosystems like Ethereum their state obviously can’t be rolled back like a parachain and so finality will need to be much longer (60 minutes was suggested in the whitepaper) and discussed in more detail in part three
AvalancheAvalanche consensus achieves finality within 3 seconds, with most happening sub 1 second, immutable and completely irreversible. Any subnet can connect directly to another without having to go through multiple hops and any VM can talk to another VM within the same subnet as well as external subnets. It doesn’t need to wait for an extended period of time with risk of rollbacks.
ResultsWith regards to performance far too much emphasis is just put on tps as a metric, the other equally important metric, if not more important with regards to finance is latency. Throughput measures the amount of data at any given time that it can handle whereas latency is the amount of time it takes to perform an action. It’s pointless saying you can process more transactions per second than VISA when it takes 60 seconds for a transaction to complete. Low latency also greatly increases general usability and customer satisfaction, nowadays everyone expects card payments, online payments to happen instantly. Avalanche achieves the best results scoring ✅✅✅, Cosmos with comes in second with 6 second finality ✅✅ and Polkadot with 60 second finality (which may be 60 minutes for external blockchains) scores ✅
CosmosEvery Zone and Hub in Cosmos has their own validator set and different trust assumptions. Cosmos are researching a shared security model where a Hub can validate the state of connected zones for a fee but not released yet. Once available this will make shared security optional rather than mandatory.
PolkadotShared Security is mandatory with Polkadot which uses a Shared State infrastructure between the Relay Chain and all of the connected parachains. If the Relay Chain must revert for any reason, then all of the parachains would also revert. Every parachain makes the same trust assumptions, and as such the relay chain validates state transition and enables seamless interoperability between them. In return for this benefit, they have to purchase DOT and win an auction for one of the available parachain slots.
However, parachains can’t just rely on the relay chain for their security, they will also need to implement censorship resistance measures and utilise proof of work / proof of stake for each parachain as well as discussed in part three, thus parachains can’t just rely on the security of the relay chain, they need to ensure sybil resistance mechanisms using POW and POS are implemented on the parachain as well.
AvalancheA subnet in Avalanche consists of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance. So unlike in Cosmos where each zone / hub has their own validators, A subnet can validate a single or many virtual machines / blockchains with a single validator set. Shared security is optional
ResultsShared security is mandatory in polkadot and a key design decision in its infrastructure. The relay chain validates the state transition of all connected parachains and thus scores ✅✅✅. Subnets in Avalanche can validate state of either a single or many virtual machines. Each subnet can have their own token and shares a validator set, where complex rulesets can be configured to meet regulatory compliance. It scores ✅ ✅. Every Zone and Hub in cosmos has their own validator set / token but research is underway to have the hub validate the state transition of connected zones, but as this is still early in the research phase scores ✅ for now.
CosmosThe Cosmos project started in 2016 with an ICO held in April 2017. There are currently around 50 projects building on the Cosmos SDK with a full list can be seen here and filtering for Cosmos SDK . Not all of the projects will necessarily connect using native cosmos sdk and IBC and some have forked parts of the Cosmos SDK and utilise the tendermint consensus such as Binance Chain but have said they will connect in the future.
PolkadotThe Polkadot project started in 2016 with an ICO held in October 2017. There are currently around 70 projects building on Substrate and a full list can be seen here and filtering for Substrate Based. Like with Cosmos not all projects built using substrate will necessarily connect to Polkadot and parachains or parathreads aren’t currently implemented in either the Live or Test network (Kusama) as of the time of this writing.
AvalancheAvalanche in comparison started much later with Ava Labs being founded in 2018. Avalanche held it’s ICO in July 2020. Due to lot shorter time it has been in development, the number of projects confirmed are smaller with around 14 projects currently building on Avalanche. Due to the customisability of the platform though, many virtual machines can be used within a subnet making the process incredibly easy to port projects over. As an example, it will launch with the Ethereum Virtual Machine which enables byte for byte compatibility and all the tooling like Metamask, Truffle etc. will work, so projects can easily move over to benefit from the performance, decentralisation and low gas fees offered. In the future Cosmos and Substrate virtual machines could be implemented on Avalanche.
ResultsWhilst it’s still early for all 3 projects (and the entire blockchain space as a whole), there is currently more projects confirmed to be building on Cosmos and Polkadot, mostly due to their longer time in development. Whilst Cosmos has fewer projects, zones are implemented compared to Polkadot which doesn’t currently have parachains. IBC to connect zones and hubs together is due to launch Q2 2021, thus both score ✅✅✅. Avalanche has been in development for a lot shorter time period, but is launching with an impressive feature set right from the start with ability to create subnets, VMs, assets, NFTs, permissioned and permissionless blockchains, cross chain atomic swaps within a subnet, smart contracts, bridge to Ethereum etc. Applications can easily port over from other platforms and use all the existing tooling such as Metamask / Truffle etc but benefit from the performance, decentralisation and low gas fees offered. Currently though just based on the number of projects in comparison it scores ✅.
CosmosCosmos enables permissioned and permissionless zones which can connect to each other with the ability to have full control over who validates the blockchain. For permissionless zones each zone / hub can have their own token and they are in control who validates.
PolkadotWith polkadot the state transition is performed by a small randomly selected assigned group of validators from the relay chain plus with the possibility that state is rolled back if an invalid transaction of any of the other parachains is found. This may pose a problem for enterprises that need complete control over who performs validation for regulatory reasons. In addition due to the limited number of parachain slots available Enterprises would have to acquire and lock up large amounts of a highly volatile asset (DOT) and have the possibility that they are outbid in future auctions and find they no longer can have their parachain validated and parathreads don’t provide the guaranteed performance requirements for the application to function.
AvalancheAvalanche enables permissioned and permissionless subnets and complex rulesets can be configured to meet regulatory compliance. For example a subnet can be created where its mandatory that all validators are from a certain legal jurisdiction, or they hold a specific license and regulated by the SEC etc. Subnets are also able to scale to tens of thousands of validators, and even potentially millions of nodes, all participating in consensus so every enterprise can run their own node rather than only a small amount. Enterprises don’t have to hold large amounts of a highly volatile asset, but instead pay a fee in AVAX for the creation of the subnets and blockchains which is burnt.
ResultsAvalanche provides the customisability to run private permissioned blockchains as well as permissionless where the enterprise is in control over who validates the blockchain, with the ability to use complex rulesets to meet regulatory compliance, thus scores ✅✅✅. Cosmos is also able to run permissioned and permissionless zones / hubs so enterprises have full control over who validates a blockchain and scores ✅✅. Polkadot requires locking up large amounts of a highly volatile asset with the possibility of being outbid by competitors and being unable to run the application if the guaranteed performance is required and having to migrate away. The relay chain validates the state transition and can roll back the parachain should an invalid block be detected on another parachain, thus scores ✅.
CosmosCosmos will connect Hubs and Zones together through its IBC protocol (due to release in Q1 2020). Connecting to blockchains outside of the Cosmos ecosystem would either require the connected blockchain to fork their code to implement IBC or more likely a custom “Peg Zone” will be created specific to work with a particular blockchain it’s trying to bridge to such as Ethereum etc. Each Zone and Hub has different trust levels and connectivity between 2 zones can have different trust depending on which path it takes (this is discussed more in this article). Finality time is low at 6 seconds, but depending on the number of hops, this can increase significantly.
PolkadotPolkadot’s shared state means each parachain that connects shares the same trust assumptions, of the relay chain validators and that if one blockchain needs to be reverted, all of them will need to be reverted. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Finality time between parachains is around 60 seconds, but longer will be needed (initial figures of 60 minutes in the whitepaper) for connecting to external blockchains. Thus limiting the appeal of connecting two external ecosystems together through Polkadot. Polkadot is also limited in the number of Parachain slots available, thus limiting the amount of blockchains that can be bridged. Parathreads could be used for lower performance bridges, but the speed of future blockchains is only going to increase.
AvalancheA subnet can validate multiple virtual machines / blockchains and all blockchains within a subnet share the same trust assumptions / validator set, enabling cross chain interoperability. Interoperability is also possible between any other subnet, with the hope Avalanche will consist of thousands of subnets. Each subnet may have a different trust level, but as the primary network consists of all validators then this can be used as a source of trust if required. As Avalanche supports many virtual machines, bridges to other ecosystems are created by running the connected virtual machine. There will be an Ethereum bridge using the EVM shortly after mainnet. Finality time is much faster at sub 3 seconds (with most happening under 1 second) with no chance of rolling back so more appealing when connecting to external blockchains.
ResultsAll 3 systems are able to perform interoperability within their ecosystem and transfer assets as well as data, as well as use bridges to connect to external blockchains. Cosmos has different trust levels between its zones and hubs and can create issues depending on which path it takes and additional latency added. Polkadot provides the same trust assumptions for all connected parachains but has long finality and limited number of parachain slots available. Avalanche provides the same trust assumptions for all blockchains within a subnet, and different trust levels between subnets. However due to the primary network consisting of all validators it can be used for trust. Avalanche also has a much faster finality time with no limitation on the number of blockchains / subnets / bridges that can be created. Overall all three blockchains excel with interoperability within their ecosystem and each score ✅✅.
CosmosThe ATOM token is the native token for the Cosmos Hub. It is commonly mistaken by people that think it’s the token used throughout the cosmos ecosystem, whereas it’s just used for one of many hubs in Cosmos, each with their own token. Currently ATOM has little utility as IBC isn’t released and has no connections to other zones / hubs. Once IBC is released zones may prefer to connect to a different hub instead and so ATOM is not used. ATOM isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for ATOM as of the time of this writing is $1 Billion with 203 million circulating supply. Rewards can be earnt through staking to offset the dilution caused by inflation. Delegators can also get slashed and lose a portion of their ATOM should the validator misbehave.
PolkadotPolkadot’s native token is DOT and it’s used to secure the Relay Chain. Each parachain needs to acquire sufficient DOT to win an auction on an available parachain lease period of up to 24 months at a time. Parathreads have a fixed fee for registration that would realistically be much lower than the cost of acquiring a parachain slot and compete with other parathreads in a per-block auction to have their transactions included in the next relay chain block. DOT isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for DOT as of the time of this writing is $4.4 Billion with 852 million circulating supply. Delegators can also get slashed and lose their DOT (potentially 100% of their DOT for serious attacks) should the validator misbehave.
AvalancheAVAX is the native token for the primary network in Avalanche. Every validator of any subnet also has to validate the primary network and stake a minimum of 2000 AVAX. There is no limit to the number of validators like other consensus methods then this can cater for tens of thousands even potentially millions of validators. As every validator validates the primary network, this can be a source of trust for interoperability between subnets as well as connecting to other ecosystems, thus increasing amount of transaction fees of AVAX. There is no slashing in Avalanche, so there is no risk to lose your AVAX when selecting a validator, instead rewards earnt for staking can be slashed should the validator misbehave. Because Avalanche doesn’t have direct slashing, it is technically possible for someone to both stake AND deliver tokens for something like a flash loan, under the invariant that all tokens that are staked are returned, thus being able to make profit with staked tokens outside of staking itself.
There will also be a separate subnet for Athereum which is a ‘spoon,’ or friendly fork, of Ethereum, which benefits from the Avalanche consensus protocol and applications in the Ethereum ecosystem. It’s native token ATH will be airdropped to ETH holders as well as potentially AVAX holders as well. This can be done for other blockchains as well.
Transaction fees on the primary network for all 3 of the blockchains as well as subscription fees for creating a subnet and blockchain are paid in AVAX and are burnt, creating deflationary pressure. AVAX is a fixed capped supply of 720 million tokens, creating scarcity rather than an unlimited supply which continuously increase of tokens at a compounded rate each year like others. Initially there will be 360 tokens minted at Mainnet with vesting periods between 1 and 10 years, with tokens gradually unlocking each quarter. The Circulating supply is 24.5 million AVAX with tokens gradually released each quater. The current market cap of AVAX is around $100 million.
ResultsAvalanche’s AVAX with its fixed capped supply, deflationary pressure, very strong utility, potential to receive air drops and low market cap, means it scores ✅✅✅. Polkadot’s DOT also has very strong utility with the need for auctions to acquire parachain slots, but has no deflationary mechanisms, no fixed capped supply and already valued at $3.8 billion, therefore scores ✅✅. Cosmos’s ATOM token is only for the Cosmos Hub, of which there will be many hubs in the ecosystem and has very little utility currently. (this may improve once IBC is released and if Cosmos hub actually becomes the hub that people want to connect to and not something like Binance instead. There is no fixed capped supply and currently valued at $1.1 Billion, so scores ✅.
All three are excellent projects and have similarities as well as many differences. Just to reiterate this article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions, you may have different criteria which is important to you, and score them differently. There won’t be one platform to rule them all however, with some uses cases better suited to one platform over another, and it’s not a zero-sum game. Blockchain is going to completely revolutionize industries and the Internet itself. The more projects researching and delivering breakthrough technology the better, each learning from each other and pushing each other to reach that goal earlier. The current market is a tiny speck of what’s in store in terms of value and adoption and it’s going to be exciting to watch it unfold.
For more information see the articles below (each with additional sources at the bottom of their articles)
Avalanche, a Revolutionary Consensus Engine and Platform. A Game Changer for Blockchain
Avalanche Consensus, The Biggest Breakthrough since Nakamoto
Cosmos — An Early In-Depth Analysis — Part One
Cosmos — An Early In-Depth Analysis — Part Two
Cosmos Hub ATOM Token and the commonly misunderstood staking tokens — Part Three
Polkadot — An Early In-Depth Analysis — Part One — Overview and Benefits
Polkadot — An Early In-Depth Analysis — Part Two — How Consensus Works
Polkadot — An Early In-Depth Analysis — Part Three — Limitations and Issues
If you are not bullish in general on cryptocurrencies you have no place in investing or trading cryptocurrencies since it's always a losing proposition to trade in bubbles, a scientifically proven fact. If on the other hand you are then your goal is to grow your portfolio more than you would if holding BTC/ETH for example.
If I decide because the sky is blue to make my coin supply 100 Trillion FoolCoins with a price of $0.001 and there is another WiseCoin with a supply of 100 Million and price of $1 then FoolCoins are more expensive. - Alex Fin's Cap Law
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
submitted by charlesgwynne to CryptocurrencyICO [link] [comments]
Altcoin Explorer: NEM (XEM), the Enterprise-Grade Blockchain Platform
Nestled among the top 40 cryptocurrencies by reported market cap, New Economy Movement — popularly known as NEM (XEM) – is a peer-to-peer (P2P), dual-layer blockchain smart contract platform written in one of the most influential programming languages, Java. NEM uses the proof-of-importance (POI) consensus algorithm that essentially values the tokens held and the activity conducted by the nodes on the blockchain network.
In this Altcoin Explorer, BTCManager delves deeper into the finer intricacies of the NEM blockchain protocol, including the project’s POI consensus algorithm, its native digital token XEM, and some of its real-world use-cases.
Without further ado, let’s get to the core of this high-performance distributed ledger technology (DLT) platform.
History of NEMNEM was launched on March 31, 2015, with an aim to develop an enterprise-grade blockchain protocol that could circumvent the infamous trilemma of blockchain: scalability, speed, and privacy.
Operated by a Gibraltar-registered NEM Group, NEM is a fork-out version of the NXT blockchain. After the successful fork, the NEM community decided to build its ecosystem from the ground up and developed its own codebase to make the network more scalable and faster.
NEM’s insistence toward building its own tech infrastructure led to a DLT protocol that is unlike anything resembling other similar platforms.
Today, NEM ranks among the top go-to blockchain platforms for enterprises across the world, rivaling competing protocols including Ethereum (ETH), and TRON (TRX), among others.
NEM’s Proof-of-Importance (POI) AlgorithmUnlike Bitcoin’s (BTC) energy-intensive Proof-of-Work (PoW) and Ethereum’s yet-to-be-implemented Proof-of-Stake (PoS) consensus algorithm, NEM uses PoI consensus mechanism.
The PoI mechanism achieves consensus by incentivizing active user participation in the NEM network. This consensus infrastructure ensures an agile decentralized network by rewarding well-behaved nodes that not only possess a significant stake in the network but are also actively engaged in executing transactions to maintain the network’s robustness.
Specifically, each node in the network possesses an ‘Importance Score’ that impacts the number of times the said node can ‘Harvest’ the XEM altcoin.
Initially, when a user puts XEM tokens into their wallet, they are called ‘unvested coins.’ Over time, as the wallets start accumulating an increasing number of XEM and contribute to the network’s transaction volume, they start collecting importance scores. At the same time, the XEM tokens in these wallets change into ‘vested coins,’ provided that there are at least 10000 tokens in the wallet.
To put things into perspective, let’s take the help of a small example.
On day 1, Joe receives 50,000 XEM in his digital wallet. Now, with each passing day, the NEM network will ‘vest’ 10 percent of the tokens held by Joe. So, on day 2, 5,000 tokens held by Joe are vested into the network. On day 3, 10 percent of the remaining tokens – 15,000 XEM – get vested into the network, leaving Joe with 13,500 XEM, and so one. After a couple of days, Joe sees that the number of XEM vested by him has crossed the 10,000 coins threshold, thereby, making him eligible to seek rewards from the NEM blockchain for his contribution to vesting his tokens.
Close followers of blockchain projects would find the aforementioned network reward mechanism bear a close resemblance to the PoS consensus algorithm. However, it’s worthy of note that vesting coins is just one way of calculating a node’s importance score.
The NEM protocol also rewards nodes that are responsible for most activity on the network. In essence, this means that the higher the number of transactions executed by a node, the more likely it is to gain higher importance points. The balance between vesting XEM and network activity is an important metric to be maintained by NEM nodes as it directly impacts their likelihood of harvesting XEM.
NEM’s consensus algorithm does away with several issues plaguing the more energy-intensive protocols such as PoW. For instance, PoI does not necessarily require high-energy hardware to run the nodes. The decentralized nature of the algorithm means that almost any machine — irrespective of its tech configuration – can participate in the NEM ecosystem ensuring it remains decentralized.
NEM’s Native Digital Token — XEMXEM, unlike the vast majority of other cryptocurrencies, isn’t mined or staked using Pow or PoS algorithms. Rather, as explained earlier, XEM is ‘harvested’ through the PoI algorithm which ensures a steady supply of the digital token without flooding the market and involving the risk of a dramatic crash in price.
Per data on CoinMarketCap, at the time of writing, XEM trades at $0.04 with a market cap of more than $382 million and a 24-hour trading volume of approximately $6.8 million. The coin reached its all-time high of $1.92 in January 2018.
A large number of reputable cryptocurrency exchanges trade XEM, including Binance, Upbit, OKEx, Bithumb, ProBit, among others. The digital token can be easily traded with BTC, ETH, and USDT trading pairs.
That said, if you wish to vest your XEM to partake in the maintenance of the NEM network and earn rewards, it is recommended you store your tokens in the official NEM Nano wallet for desktop and mobile OS. Only XEM tokens held in the official NEM Nano wallet are eligible for vesting.
NEM Use-CasesTo date, NEM has been deployed for various real-world applications with promising results.
In 2018, Ukraine launched a blockchain-based e-voting trial leveraging the NEM DLT platform.
At the time, Ukraine’s Central Election Commission – with the local NEM Foundation representation – estimated the test vote trial in each polling station could cost as low as $1,227. The organization’s Oleksandr Stelmakh lauded the efforts, saying that using a blockchain-powered voting mechanism would make it impossible for anyone to fiddle with the records. The Commission added that the NEM protocol presents information in a more user-friendly format for voters.
In the same year, Malaysia’s Ministry of Education launched an e-scroll system based on the NEM blockchain to tackle the menace of fake degrees. The University Degree Issuance and Verification System use the NEM blockchain which is interrogated upon scanning of a QR code printed on the degree certificate.
The Ministry added that one of the primary reasons for its decision to selected the NEM platform was its unique and cutting-edge features in managing traceability and authentication requirements.
On a recent note, the Bank of Lithuania announced that it would be issuing its NEM blockchain-powered digital collector’s coin (LBCoin) in July after the successful completion of its testing phase.
Final ThoughtsSumming up, NEM offers a wide array of in-house features that separate it from other blockchain projects in a space that is becoming increasingly congested. NEM’s creative PoI consensus algorithm is a fresh take on the PoS algorithm for performance enhancement. Further, the project’s newly launched enterprise-grade DLT solution, Symbol, offers a tremendous option to businesses to help them cut costs, reduce complexities, and streamline innovation.
NEM uses the Java programming language that makes it an easy project for developers to get involved with, unlike other projects such as Ethereum that use platform-specific programming languages like Solidity. The project’s tech infrastructure not only makes it less power-intensive compared to Bitcoin but also more scalable than its rival projects including Ethereum and NEO.
NEM’s tagline, “Smart Asset Blockchain, Built for Performance,” perfectly captures everything the project has to offer. Over the years, NEM’s active developer community has craftily addressed the notorious bottlenecks in the vast majority of blockchain solutions, The future looks promising for NEM as it continues to foster a trustless and blockchain-driven economy for tomorrow.
Thebitcoincode juni 22, 2020 bitcoin code 2020, bitcoin code svenska, bitcoin code sverige, bitcoin-code.se, thebitcoincode.nu bitcoin code 2020 Kommentarer inaktiverade för Binance U-Turn: Exchange Finally Adds DigiByte for Zero Listing Fee Binance explained (A beginner’s guide to getting started) by Crypto Coin Dude February 16, 2020. written by Crypto Coin Dude February 16, 2020 . Hey guys. Today’s post is on how to use Binance. This crypto exchange really should be one that you register with and get your account up and running. Even if you are not using it currently, there will be a time when you’ll need it and you don ... Inside Bitcoin is a scripting language dictating how funds can be spent and by who. Learn more about Bitcoin Script at Binance Academy. Binance est une plateforme avancée qui vous propose d’échanger BTC, ETH, BNB et d’autres cryptomonnaies While most cryptocurrencies on Binance are trading against Bitcoin, Binance offers many trading pairs against Ethreum, Ripple, and Tron. Trading against FIAT hadn’t been easier, as Binance offers plenty of trading pairs against the US-pegged stablecoins USDT, USDC, BUSD, TUSD, PAX, and more. Binance also offers to trade against some local FIAT coins such as the Russian Ruble and the Turkish ... Binance for trading cryptocurrency – https://calcur.tech/binance. Have you always wanted to learn how to trade bitcoin but are confused on how to do it? This 6 part series is going to give you the answers you need to get started! In this video we are talking about binance coin otherwise known as BNB. Bitcoin Halving Code explained! Bitcoin Halving Code. For every block generated by miners need to put the block subsidy (block reward) for that block in coibase transaction. So this block subsidy is calculated for any block generated through a function defined in 1238 line of validation.cpp file in bitcoin source code. Binance Trading Platform Binance Futures and Derivatives. Binance Futures, which was launched in 2019, enables traders to speculate on the price of (rather than to purchase and sell) Bitcoin and various popular altcoins, including Bitcoin Cash, Ethereum, Litecoin, Ripple and more.. The platform allows leveraged trading of up to 125x, which means that traders can multiply their profits (but ... Binance takes security very seriously, and customers are asked to set up two-factor authentication (2FA) when they register an account. 2FA is an extra level of security that sends a special code to your mobile phone every time you want to log in, trade, or withdraw funds. Bitcoin Transaction Explained. Blockchain can modernize the system of mutual settlements and radically change the work with external regulators. The uniqueness of the technology lies in the immutable and irreversible nature of data in a chain created on a cryptographic algorithm. The main characteristic of any transaction is determinism. This operation can either be performed or rejected ...
[index]          
#bitcoin #crypto #cryptocurrencies In this quick video we will show how to place a trade in Binance Futures. ----- ... #binance #crypto #bitcoin Explaining the Bittrex and Binance ban from the US Where do you think the money will flow? Updates on technical and fundamental analysis to keep you on track with your ... BINANCE KYC EXTORTION, Hack explained 😳 Gold, Bitcoin, Stocks - Programmer explains Ivan on Tech. Loading... Unsubscribe from Ivan on Tech? Cancel Unsubscribe. Working... Subscribe Subscribed ... How to trade bitcoin futures on binance for beginners. Binance Bitcoin Futures Trading for Beginners EXPLAINED Join Binance https://www.binance.com/?ref=... =====(binance tutorial)===== Bitcoin Trading Tutorial 6 - Binance Coin (BNB) Explained #binance tutorial for beginners #binance tutorial bd #binance tutorial... =====(binance tutorial for beginners)===== Bitcoin Trading Tutorial 6 - Binance Coin (BNB) Explained #binance tutorial tagalog #binance tutorial malayalam #b...